Cutting
This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice
Engraving
This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category
Marking
This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included
Recyclable
This item can be recycled
Recycled
This item can be recycled
Sustainable
This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.
0.2mm laser engraving laminate with black micro surface layer on a white core
This product is specially manufactured for Hobarts for processing on a laser. It is a 2-ply sheet with a micro thin (0.1mm) top layer on a (0.1mm) coloured bottom layer. By engraving away the top layer it reveals the base colour
Suitable for both interior & exterior signage.
Clean with warm soapy water - do not use abrasives.
For best results we recommend engraving bottom to top so that your air assist is not dragging the colour across a lighter core colour
Available in 2 sizes: 300x200mm & 610x305mm
Used in the modernised cockpit of a WW1 Sopwith Strutter Bi Plane, diode lasers work great with this
Used with a 10w diode laser at only 10% power the lettering is clear and distinct. The adhesive backing makes this material for ideal for placarding which, strangely enough, is exactly what I used it for.
The only downside is the smell so I strongly advise using an enclosure with extraction and let it vent for a few minutes before opening.
This product will be shipped on a next-day service by DHL. For Highlands, Islands, Northern Ireland and remote areas a DHL 48-hour service applies. Prices* start from:
£6.50 for up to 1kg
£7.25 for up to 5kg
£7.50 for up to 10kg
£8.00 for up to 15kg
£9.50 for up to 20kg
Then in bands of 5kg up to 200kg. From 201kg to 300kg in bands of 10kg and from 301kg in bands of 25kg
For larger orders (over 200kg), a pallet network may be used but this will be discussed with our customers first.
We only ship to European destinations. Please see “Shipping” under sales Information at the foot of his page. Prices from £26.92* for 30kg
*correct as at 10.02.2023
Used in the modernised cockpit of a WW1 Sopwith Strutter Bi Plane, diode lasers work great with this
Used with a 10w diode laser at only 10% power the lettering is clear and distinct. The adhesive backing makes this material for ideal for placarding which, strangely enough, is exactly what I used it for.
The only downside is the smell so I strongly advise using an enclosure with extraction and let it vent for a few minutes before opening.
Skip to content
